 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HCC4529B HCF4529B DUAL 4-CHANNEL OR SINGLE 8-CHANNEL ANALOG DATA SELECTOR .DATAPATHSAREBI .10MHzOPERATI .3." .SUPPLYVOLTAGERANGE=3VdcTO18Vdc DIRECTIONAL ON (typical) STATE OUTPUTS ON" RESISTANCE 125 W TYPICAL @ 15V EY (Plastic Package) F (Ceramic Package) M1 (Micro Package) C1 (Chip Carrier) ORDER CODES : HCC4529BF HCF4529BM1 HCF4529BEY HCF4529BC1 PIN CONNECTIONS DESCRIPTION The HCC4529B (extended temperataure range) and HCF4529B (intermediate temperature range) are monolithic integrated circuits available in 16lead dual in line plastic or ceramic package and plastic micropackage. The HCC/HCF4529B is a DUAL 4-CHANNEL or 8CHANNEL device. One of the two possible functions can be selected by a proper input coding. For the single 8-bit mode Z and W output must be tied together. HCC/HCF4529B is suitable for digital as well as analogue applications, including 1 of 4 and 1 of 8 data selector functions. Dual binary to 1 of 4 or single binary to 1 of 8 decoder applications can be implemented because the device allow analogue and bidirectional operation. September 1988 1/10 HCC/HCF4529B ABSOLUTE MAXIMUM RATING Symbol VDD * Vi II Ptot Parameter Supply Voltage: HCC Types HCF Types Input Voltage DC Input Current (any one input) Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package Temperature Range Operating Temperature: HCC Types HCF Types Storage Temperature Value -0.5 to +20 -0.5 to +18 -0.5 to VDD + 0.5 10 200 100 -55 to +125 -40 to +85 -65 to +150 Unit V V V mA mW mW o o o Top Tstg C C C Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress ratingonly and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. TRUTH TABLE STX 1 1 1 1 1 1 1 1 0 0 0 0 0 STY 1 1 1 1 0 0 0 0 1 1 1 1 0 B 0 0 1 1 0 0 1 1 0 0 1 1 X A 0 1 0 1 0 1 0 1 0 1 0 1 X Z X0 X1 X2 X3 X0 X1 X2 X3 Y0 Y1 Y2 Y3 High Impedance W Y0 Y1 Y2 Y3 MODE Dual 4-Channel Mode 2 Outputs Single 8-Channel Mode 1 Output (Z and W tied together) FUNCTIONAL DIAGRAM X = Don't care RECOMMENDED OPERATING CONDITIONS Symbol VDD VI Top Parameter Supply Voltage: HCC Types HCF Types Input Voltage Operating Temperature: HCC Types HCF Types Value 3 to 18 3 to 15 0 to VDD -55 to +125 -40 to +85 Unit V V V o o C C 2/10 HCC/HCF4529B BLOCK DIAGRAM 3/10 HCC/HCF4529B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditios Symbol IL Parameter Quiescent Current VIS (V) VSS (V) VDD (V) 5 HCC Types 10 15 20 HCF Types SWITCH ON Resistance HCC Types HCC Types ON Resistance RON (Between any 2 channels) Any Channel OFF All Channel OFF (common OUT/IN) Any Channel OFF All Channel OFF (common OUT/IN) Input Low Voltage Input High Voltage Input Leakage Current HCC Types HCF Types HCC Types HCC Types HCC Types HCC Types 0 VI V DD 0 VI V DD 5 0 10 15 5 0 10 15 5 0 10 15 18 100 880 310 220 880 330 230 470 180 125 470 180 125 10 10 5 0.1 100 1000 1050 400 280 1050 400 280 1200 580 400 1200 520 360 5 10 15 TLOW * Min. Max. 5 10 20 100 20 40 80 Value 25 oC Min. Typ. Max. 0.04 0.04 0.04 0.08 0.04 0.04 0.04 5 10 20 100 20 40 80 THIGH * Min. Max. 150 300 600 3000 150 300 600 A Unit OFF Channel Leakage Current 0 nA 0 18 100 0.1 100 1000 nA 0 15 300 0.1 300 1000 nA 0 15 300 0.1 300 1000 nA CONTROL (Address or Inhibit) V IL = VDD thru 1K RL=1K to VSS IIS < 2A (On All OFF Channels) 5 10 15 5 10 15 18 15 3.5 7 11 0.1 0.3 1.5 3 4 3.5 7 11 10-3 10-3 5 0.1 0.3 7.5 1.5 3 4 3.5 7 11 1 1 pF V 1.5 3 4 V VIH IIH, IIL VI = 0/18V VI = 0/15V Any Input A CI Input Capacitance * TLOW = -55 oC for HCC device: -40 oC for HCF device. * THIGH = +125 oC for HCC device: +85 oC for HCF device. The Noise Margin for both "1" and "0" level is: 1V min. with VDD = 5 V, 2 V min. with VDD = 10 V, 2.5 V min. with VDD = 15 V 4/10 HCC/HCF4529B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25 o C, C L = 50 pF, RL = 200 K, o typical temperature coefficent for all VDD values is 03 %/ C, all input rise and fall times= 20 ns) Symbol tPLH tPHL tPLH tPHL Parameter Vin to Vout Propagation Delay Time (CL = 50pF, RL = 1K) Propagation Delay Time, Control to Output, Vin = V DD or VSS (Vin 10 Vdc, CL = 50pF, RL = 1 K) Crosstalk, Control to Output (CL = 50pF, RL = 1 K, Rout = 10 K) Maximum Control Input Pulse Frequency (CL = 50pF, RL = 1 K) Sine Wave (Distortion) (Vin = 1.77 Vdc RMS Centred @ 0.0 Vdc, RL = 10 K, f = 1 KHz) BW Bandwidth (-3 dB) (Vin = 1.77 Vdc RMS Centred @ 0.0 Vdc) (RL = 1K) (RL = 10K) (RL = 100K) (RL = 1M) Feedthrough and Crosstalk Vout 20 Log10 V = - 50 dB in (RL = 1K) (RL = 10K) (RL = 100K) (RL = 1M) Test Conditions VSS (V) VDD (V) 0 5 10 15 0 5 10 15 0 5 10 15 0 5 10 15 -5 -5 5 5 35 28 27 26 -5 5 MHz Min. Value Typ. 20 10 8 200 80 50 5 5 5 5 10 12 0.36 MHz mV Max. 40 20 15 400 160 120 ns ns Unit % 850 100 12 1.5 KHz 5/10 HCC/HCF4529B Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 6/10 HCC/HCF4529B Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 7/10 HCC/HCF4529B SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8 (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45 (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 8/10 HCC/HCF4529B PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 9/10 HCC/HCF4529B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 10/10 |
Price & Availability of HCF4529B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |